Mould in Your Car: Causes, How to Remove It and When to Get Help

Car interior cleaning Perth

It usually starts with the smell. You open the car after a few wet days and get hit with that musty, damp-cupboard odour. Then you spot it: white fuzz on the seatbelt, grey spots on the headlining, or a green bloom on the back of a seat.

Small patches of surface mould can often be cleaned yourself. But mould is a sign that water is getting in or staying in, and if you only wipe away what you can see, it will come back. This guide covers what causes it, how to clean it safely, and when it’s time to hand it over.

Why Mould Grows in Cars

Mould needs three things: moisture, something to feed on, and still air. A closed car has all three. Fabric seats, carpet, skin flakes, food crumbs and spilled drinks give it plenty to feed on. The only thing it’s waiting for is water.

Water Getting In

The most common cause is a leak you haven’t noticed. Water can get in through:

  • Worn or damaged door and boot seals
  • Blocked sunroof drains, which can overflow into the headlining and down the pillars
  • A blocked air conditioning drain, which can drip into the front footwell
  • A windscreen seal that has failed or wasn’t sealed properly after replacement
  • A window or door left slightly open in the rain

Wet Things Left Inside

You don’t need a leak for mould to grow. Wet beach towels, swimmers, gym gear, kids’ sports uniforms, umbrellas and wet dogs all bring moisture in. A spilt milk drink or water bottle soaking into the carpet is enough to start it too.

In Perth, summer is just as risky as winter for this. Damp towels and boardies left on the back seat after a day at the beach, then baked in a closed car, make a warm, wet spot that’s ideal for mould.

Cars Left Closed for Weeks

Cars that sit unused, closed up, are especially prone. Moisture can’t escape, and nothing disturbs the air. That’s a common story for FIFO workers’ cars parked at home or at the airport while they’re on swing, and for second cars or caravans that only come out a few times a year.

Perth’s Wet Winters

Most of Perth’s rain falls in winter. The Bureau of Meteorology puts Perth Metro’s long-term average winter rainfall at 398.4mm, and winter 2025 was above average across much of Greater Perth. Weeks of wet weather mean wet shoes on the carpet, foggy windows and seals being tested, which is when slow leaks finally show up.

Where Mould Hides in a Car

Mould doesn’t always grow where you’d expect. Use this as a quick guide to where to look and what it might be telling you.

Where you find it

What’s likely causing it

What to check

Carpet in the front footwells

AC drain blockage, windscreen or door seal leak, wet shoes

Lift the floor mats and press the carpet. Check whether the underlay below is wet.

Rear footwells or boot

Door or boot seal leak, wet gear left in the car

Check the boot floor and spare wheel well for pooled water

Headlining and roof pillars

Blocked sunroof drains, roof or windscreen seal

Look for water stains running down the pillars

Seats and seatbelts

Wet clothing, towels or spills; a car left closed up

Pull the seatbelt all the way out. Mould often grows on the hidden section.

Air vents (musty smell when the AC turns on)

Moisture in the air conditioning system

See a mechanic or air conditioning specialist

Is Mould in Your Car Dangerous?

It can be. WA Health says mould and dampness have been linked to asthma attacks, itchy or watery eyes, respiratory infections, rashes and sinus problems. Reactions are more likely in people with serious mould allergies or chronic lung disease, but even people without allergies may have health problems.

A car is a small, enclosed space, and you breathe its air the whole time you drive. If you or anyone who rides in the car has asthma, allergies or a lung condition, it’s best not to clean the mould yourself. Let someone else do it, and see your GP if symptoms keep going.

How to Remove Mould From Your Car Safely

This method suits small patches of surface mould on seats, carpet, seatbelts and hard surfaces. If the mould is widespread or keeps coming back, skip ahead to when to get help.

Protect Yourself First

WA Health recommends rubber gloves, a face mask and safety goggles when cleaning mould. Work outside, with every door open, on a dry day if you can. Don’t run a fan or leaf blower inside the car, because strong air movement spreads spores around.

Move the Car Into Fresh Air and Sun

Park somewhere open, take the floor mats out, and let the car air out for a while before you start. Lay the mats out in the sun to dry, rubber side up first.

This is one of the few times Perth’s strong sun works in your favour. A dry, sunny day is the best time to tackle mould, because everything dries faster afterwards.

Vacuum Loose Mould Carefully

Use a vacuum with a HEPA filter if you have one, so you aren’t blowing spores back out of the exhaust. Go slowly over the affected area. Empty the vacuum outside and wash or bin the filter afterwards.

Clean Hard Surfaces

On plastics, vinyl and the dashboard, WA Health’s advice is simple: scrub the mould off with soapy water. The scrubbing does most of the work. Clean up to 50cm past the edge of the visible mould, because new growth may not be visible yet.

Wipe away the residue with a clean, damp cloth, then dry the surface.

Treat Fabric Seats and Carpet

Fabric is harder, because mould grows into the fibres, not just on top.

  1. Lightly mist the area with a mild cleaner. WA Health lists diluted vinegar as one natural anti-fungal option.
  2. Agitate gently with a soft brush. Don’t soak the fabric, because that just adds more moisture.
  3. Blot or extract the moisture with a clean microfibre cloth or a wet-and-dry vacuum.
  4. Let it dry completely with the doors open.

If the mould has soaked through to the foam in the seat or the underlay below the carpet, surface cleaning won’t reach it. WA Health’s guidance notes that porous materials that can’t be properly cleaned may need to be removed, so this is the point to get help.

Never Mix Cleaning Products

Don’t mix bleach with vinegar, ammonia or any other cleaner. WA Health warns that household chemicals should never be mixed, because harmful gases can form. In a closed car, that risk is even worse. Bleach can also permanently discolour car fabrics and carpet.

Dry Everything Properly

This is the step most people skip, and it’s why mould comes back. Leave the doors and windows open in the sun until the seats, carpet and mats are dry right through, not just on the surface. Press firmly on the carpet with a dry paper towel. If it comes up damp, it’s not ready.

Stopping Mould Coming Back

Cleaning only fixes the symptom. To stop it returning:

  • Find the water source. Check the seals, sunroof drains and AC drain, and get any leak fixed.
  • Don’t leave wet gear in the car. Take towels, swimmers and gym clothes inside straight away.
  • Dry spills straight away. Blot them up and leave the windows down to dry.
  • Air the car out. If it sits for weeks, open it up on dry days when you can, or have someone do it for you.
  • Use moisture absorbers. Moisture traps or silica packs help in a car that sits closed for long periods.
  • Use fresh air, not recirculate. Recirculating the air traps moisture inside the cabin.

When to Get Professional Help

WA Health’s indoor mould guidance is written for buildings, but its rules of thumb make sense in a car too.

Situation

DIY or get help?

A small patch on one seat, seatbelt or hard surface

Usually fine to clean yourself

Mould covering more than about 1m², or in several places

Get help

Mould that comes back after you’ve cleaned it

Get help, and find the leak

A musty smell from the air vents

See a mechanic or air conditioning specialist

Mould through the seat foam or under the carpet

Get help, as parts may need removing or replacing

The car has been in floodwater

Get help, and contact your insurer

Someone who uses the car has asthma, allergies or a lung condition

Get help, rather than cleaning it yourself

A professional interior clean goes deeper than DIY. Steam cleaning and hot-water extraction reach into the fabric, and the car can be dried properly afterwards. A professional can also spot where the water is coming from, so you know what needs fixing.

Roilty FX is a mobile detailer, so we come to your home or workplace anywhere in Perth. If your car has a mould problem, or just a damp smell that won’t shift, have a look at our car detailing services or see what affects interior car detailing costs in Perth. If it’s only a smell with no visible mould, our guide to removing bad smells from your car interior is a good place to start.

Car Mould FAQs

For small patches, WA Health says scrubbing with soapy water is usually enough. Diluted vinegar is a natural option for fabric. Whatever you use, drying the car completely and fixing the source of the moisture matters more than the product.
It’s not recommended inside a car. Bleach can permanently discolour seats and carpet, and it gives off fumes in an enclosed space. Never mix it with other cleaners.
The mould may be hidden under the carpet, inside the seat foam, or in the air conditioning system. Lift the floor mats and check whether the carpet or underlay is damp. If the smell is strongest when the air con is on, get the system checked.
It will if the moisture is still there. Find and fix any leak, keep wet gear out of the car, and make sure everything is fully dry after cleaning.

Mould or a damp smell you can’t get rid of? Book a mobile interior detail with Roilty FX and we’ll come to you anywhere in Perth.